120 volt/60 amp Charge Controller


SuKam solar Charger Controller is a system with advanced MOSFET based PWM technology. The term “charge controller” refers to a device that charge the battery from solar panel.



PWM Range – 60A / 120V

SuKam solar Charger Controller is a system with advanced MOSFET based PWM technology. The term “charge controller” refers to a device that charge the battery from solar panel.

Working Principle

The controller is for off-grid solar systems. This protects the battery from getting over charged using the solar modules and over discharged by the loads. The charging process has been optimized for long battery life and improved system performance.

The comprehensive self-diagnostics and electronic protection functions prevent damage from installation mistakes or system faults.


  • – Excellent EMC design
  • – Nominal system voltage automatic recognition
  • – High efficient series PWM charging, increases battery life and improves the solar system performance
  • – Use MOSFET as an electronic switch, without any mechanical switch
  • – Widely used, automatically recognizes day/night
  • – Humanized design of browser interface for convenience of operation
  • – Full control parameters setting and modification, diversified load control mode
  • – Gel, sealed and flooded battery type options
  • – Adopt temperature compensation, correction algorithm for charging and discharging parameters
  • – Automatically and improve battery life
  • – Electronic protection for overheating, overcharging, over discharging, overload, and short circuit
  • – Reverse protection : any combination of solar module and battery

Electronic protection updates

  • – Over current
  • – Battery over charge protection
  • – PV/Battery reverse polarity
  • – Reverse current flow
  • – High temperature


  • – Low battery indication
  • – Low battery reconnect indication
  • – Battery high charging cutoff
  • – Charging cutoff reconnect
  • – Over current shutdown


  • – Maximum charging current : 10 – 45A
  • – Single and dual solar array
  • – Start time : 25sec ± 5 sec
  • – Maximum PV I/P Voltage : 25V per 36Cell Solar Module
  • – Adjustable Bulk Voltage
  • – Equalization through Auto/Manual Mode


  • – Standalone DC system
  • – Home Lighting System
  • – Street Light System
  • – Stand Alone Solar System
  • – Off-grid and Micro grid
  • – Telecom Grid Solar System


  • – Installation with ease
  • – Increases the battery life
  • – Protects the battery from Overcharging
  • – Compatible with any HUPS/Inverter

Certifications & Approvals

  • – IEC 62093
  • – IP 20 Rating
  • – Approved MNRE, Govt. of India
  • – Approved by Solar Energy Center, Govt. of India


Charging Current Imax 60A
Type Series Regulator Common Positive
Maximum I/P PV Voltage 25V Per 36cell Solar module
Solar Array Dual Array
Charge Controller Start Time 25sec ± 5sec
Bulk Voltage 121V ± 1V
Adjustable Bulk Voltage 132V – 150V
Automatic Charger Restart Time after High Current Over current, Battery over charge protection, PV/Battery reverse polarity, Reverse Current Flow, High Temp. 3.5 minutes
Over Current Shutdown ≥ 110%
High Temperature Charger Comp. > 75°C ± 5°C
High Temperature Charger < 60°C ± 5°C
Reconnect ≥ 50°C
Cooling fan ON ≥ 45°C
Cooling fan OFF N/A
Operating Temperature (inhouse type test) 0°C to +40°C
Storage Temperature (inhouse type test) 0°C to +55°C
Relative Humidity 0 – 95% Non-Condensing
IP Rating IP-20
Design Service use Indoor
Mounting Type Suitable for wall mounting
Size (WxDxH) ± 10mm 400x475x151
Weight (approx) (Kg) ± 400gm 9.75kg


Model No. SUSCC-60A-120V
Brand SuKam
Warranty 2 Years
In the box SuKam 60A 120V Solar Charge Controller
Charge Controller Type PWM
Battery Voltage 120V DC


There are no reviews yet.

Be the first to review “120 volt/60 amp Charge Controller”

Questions and answers of the customers

There are no questions yet, be the first to ask something for this product.

Positive SSL