Description
Su-Kam’s Solar Charge Controller is a system advanced MOSFET based PWM Technology. The term “charge controller” refers to a device that charge the battery from solar panel.
Working Principle
The controller is for off-grid solar systems. This protects the battery from getting over charged using the solar modules and over discharged by the loads. The charging process has been optimized for long battery life and improved system performance.
The comprehensive self-diagnostics and electronic protection functions prevent functions prevent damage from installation mistakes or system faults.
Features
- – Excellent EMC design
- – Nominal system voltage automatic recognition
- – High efficient series PWM charging, increases battery life and improves the solar system performance
- – Use MOSFET as an electronic switch, without any mechanical switch
- – Widely used, automatically recognizes day/night
- – Humanized design of browser interface, for convenience of operation
- – Full control parameters setting and modification, diversified load control mode
- – Gel, sealed & flooded battery type options
- – Adopt temperature compensation, correction algorithm for charging and discharging, over load, and short circuit
- – Reverse protection: any combination of solar module and battery
Electronic Protection updates
- – Over current
- – Battery over charge protection
- – PV / Battery Reverse polarity
- – Reverse current flow
- – High temperature
Applications
- – Standalone DC system
- – Home lighting system
- – Street light system
- – Standalone solar system
Indicators
- – Low battery indication
- – Low battery reconnect indication
- – Battery high charging cutoff
- – Charging cutoff reconnect
- – Over current shutdown
Operations / options
- – Maximum charging current : 10 – 45 A
- – Single and dual solar array
- – Start time : 25 sec ± 5 sec
- – Maximum PV I/P Voltage : 25V per 36 cell solar module
- – Adjustable Bulk Voltage
- – Equalization through Auto/Manual Mode
Application
- – Standalone DC system
- – Home lighting system
- – Street lighting system
- – Standalone solar system
Convenience
- – Installation with ease
- – Increases the battery life
- – Protects the battery from over charging
- – Compatible with any UPS/Inverter
Certifications & Approvals
- – IEC 62093
- – IP 20 Rating
- – Approved by MNRE, Govt of India
- – Approved by Solar Energy Center, Govt of India
Specification
ELECTRICAL : SOLAR CHARGE CONTROLLER WITHOUT LVD | |||
Model | SUSCC-10A-12V | ||
Type | Series regulator common negative | ||
Technology | Micro controller based control using MOSFET | ||
System Voltage (configurable) | 12 V | ||
Charging current | 10A | ||
Bulk Voltage | 14.2V (Adjustable 13.2 – 15 V) | ||
Absorption period | Held battery voltage at bulk setting for a cumulative period of 1 hour | ||
Float Voltage | 13.5 V | ||
Equalizing voltage | Bulk voltage + 1V | ||
Temperature comp. coefficient | negative 3mV to negative 5mV /°C/cell (25°C Reference) | ||
Temperature comp. set points | Bulk, Absorption, Float and Equalization mode | ||
Data Monitoring | Through RS-232 | ||
INDICATIONS : LEDs are provided for easy monitoring of the system | |||
LED | Main Function | LED status | Sub Function |
Green |
Charging Mode |
Blinking with long off time | Bulk stage |
Blinking with equal interval | Absorption stage | ||
Continuously ON | Float stage | ||
Green/Red/Orange (Dual LED) |
Equalization mode with Red/Green color |
Green continuously ON | Manual Mode |
Red continuously ON | Auto mode | ||
Green blinking with equal interval | Equalization on in manual mode | ||
Red blinking with equal interval | Equalization on in auto mode | ||
Fault Display with orange color |
Continuously ON | Wrong Battery selection | |
Blinking with equal interval | Array over current | ||
Blinking with long off time | High temperature | ||
Red | Reverse polarity | Continuously ON | Array/battery reverse polarity |
Charge controller Start Time | 25 sec ± 5sec | ||
GENERAL | |||
Operating Ambient Temperature | 0°C to 40°C | ||
Storage Temperature | 0°C to 55°C | ||
Wire Terminals | Suitable for 10mm2/25mm2 (max) cable | ||
Relative Humidity | 0 – 95% (NC) | ||
Dimensions (WxDxH) in mm | 227 x 140 x 75 | ||
Weight (approx) | 1.1 Kg upto 15A / 1.4Kg for above 20A models |
Reviews
There are no reviews yet.